Scale Sino KA500-070mm
Bitte loggen Sie sich hier ein um Preise anzuzeigen.
excl. 19% VAT zzgl. Versandkosten
Measuring length: in mm Mounting length: measuring length + 102 mm Bar length: measuring length + 112 mm Hollow profile: 18 x 20 mm Installation height: 43.5 mm
ATTENTION trade restrictions (manufacturer specification)
We can only supply KA200 and KA 500 scales in connection with a corresponding SINO display. In the case of spare parts, i.e. if you want to replace a defective scale, please send the defective scale back to us beforehand.
- Description
- Downloads
- Additional information
- Reviews (0)
Description
SINO KA-500 SERIES (18×20 mm) Measuring lengths 70 – 570 mm Precision glass scale KA-500 SINO | 0.001 mm resolution as standard For a resolution of 0.005 mm, please inquire separately. Measuring head for incremental displacement measurement Precision bearing EIA 422A Lindedriver signal output for perfect signal transmission Protection class IP 55, protected against dust and water jets Closed glass measuring system with impact-resistant hollow profile Sealing lips against chips and liquids Accuracy (20 °C): ± 0.001 mm Max. speed: 120 m/ min Working voltage: 5 V ± 5% Current: 80 mA Working temperature: 0 – 45 °C Protection class: IP 55 Pin connector type: SUB-D Hollow profile: 18×20 mm Installation height: 43.5 mm Scope of delivery: For lengths up to 970mm, a so-called full cover is included. Complete with an attachment rail and protective cover as well as mounting hardware, cable clamps, cable ties and all screws. (Standard cable length is 3 meters – with KA200 2 meters). Extension cord available as an accessory. Degree of protection: According to IP55 Protection against dust and liquids is specified with an IP protection factor. The higher the numbers, the better the protection. With IP55, Sino scales are 1 and usually even 2 classes better than other glass scales. Due to the better protection, the scales will cause fewer incorrect measurements due to dirt in the long run.
ATTENTION trade restrictions (manufacturer specification)
We can only supply KA200 and KA 500 scales in connection with a corresponding SINO display. In the case of spare parts, i.e. if you want to replace a defective scale, please send the defective scale back to us beforehand.
Additional information
System | KA500 (18x20mm), KA500 (18x20mm) |
---|---|
Variante | 0- 500mm, 0- 500mm |
Design | aluminum glass, aluminum glass |
Be the first to review “Scale Sino KA500-070mm”
You must be logged in to post a review.
Reviews
There are no reviews yet.